Are you tired of seeing your battery run out before the end of your day? Has your laptop turned into a stationary computer because it has to stay plugged in all the time? Here are some tips to boost your battery life, valid for both PCs and Macs.
1. Don’t mess with your power settings!
Aside from battery hardware wear and tear, one of the most common causes of reduced battery life is related to users’ willingness to play with standard operating system power settings, as well. on Windows 10 than on MacOS. Quite often, changing these settings does not improve battery life. Power increases of course, but battery life is affected.
So if you don’t have a good reason to change the power settings, it is recommended that you keep the defaults. Windows and MacOS allow you to reset these settings:
- Windows 10: Windows settings> System> Power and standby.
- MacOS: System preferences> Energy saving.
2. Decrease screen brightness
If you’ve set the screen brightness to shine like a star, there will be a huge impact on your battery life. If you use your laptop outdoors a lot, obviously the brightness will need to be higher than indoors, but it will shorten your battery life.
Read also – Sasta laptop in india
3. Stop using Google Chrome
Google Chrome is a battery-powered sinkhole. Even though Google’s browser is very practical and ergonomic, it consumes a lot of battery and using the default browser – whether it’s Microsoft Edge or Apple’s Safari – is a good way to save tens of minutes. and sometimes even an hour of battery life on your laptop.
4. Close large applications when you are not using them
When we buy a laptop. we do not have so many applications. but with the time we install some required applications. Some very power-hungry apps, such as Photoshop, can continue to drain your battery even when you are not using them.
5. Disconnect dongles, hubs and external drives
If you are using hubs, dongles or external drives powered by a hub and connected directly to your laptop, then these devices draw power directly from your workstation. While self-powered devices are great on the go, those with a power outlet are great for relieving the battery.
6. An optimal charge level between 40% and 80%
Having a 100% or 0% battery is far from ideal. As with everything, balance is the best solution, and a charge between 40% and 80% allows you to preserve the best battery life.
Admittedly, it is not always easy to keep a constant eye on its charge, and it is therefore not uncommon to forget it, but this method is the safest in order to prolong its accumulator in order to see it return l ‘soul.
By doing so, it is possible to double to triple the number of charge cycles.
However, there is no reason to stress excessively in the event of a 100% load. In reality, a battery never recharges or completely discharges, precisely in order to avoid the least risks associated with these problems. Manufacturers put in place devices in the systems to avoid this kind of problem of total charge or discharge.
7. Avoid overheating
Batteries are particularly sensitive to high temperatures because they tend to heat up while the device is in use. This rise in heat wears out the battery and one of the solutions is therefore to cool it by letting the air circulate in order to allow the heat to escape. You should therefore avoid putting, for example, a laptop on your knees or on a cushion, which are heat sensors.
The other way to avoid overheating and to avoid the misuse of applications or browsers. So while surfing the internet, when you multiply the tabs, each one pumps energy that can lead to overheating.
8. Do not leave your battery at 0% or let it charge at 100%
Another way to extend the life of your battery is to make sure that it does not hit the critical 0% threshold. The same is true if you leave your device plugged in when it has already reached its maximum charge.
Indeed, by letting your battery reach such a level, a form of stress can develop within the battery. The only case in which the 0% level is recommended occurs when installing a new battery, and for one reason only: this allows the device to be able to perfectly calibrate the battery in the system and know when it is at 0%.